Wall frames consist of 2 x
18mm wooden strike plates. Each strike plate measures
100mm in depth and are sent out at a maximum size of
2600mm in length.
Firstly measure the height of the wall you
are to fit the strike plate. If you wish to keep
the skirting board in place you will need to measure
from the top of the skirting board to the underside
of the ceiling.
Using the strike plates provided, carefully
mark the measurements from Step 1 and cut to the
appropriate sizes.
Once cut use a piece of sand paper to clear any excess
from the edge
Now your Wall Frames are cut to size drill appropriate
holes spaced evenly at around 600 mm between each. Apply raw plugs
to the area you wish to attach and offer the newly cut wall frame up
to the area you wish to fix.
Using the screws provided attach the wall frame.
Make sure that you check that everything is level, using packing materials
where necessary.
