Installation of sliding wardrobe system

• Step 1 - Installing the top track
  Determine ceiling fixing positions. Drill 5mm holes to suit in the top track. Set the front face of the top track flush with the front edge of the alcove or end panel. Screw the track through the prepared holes into the ceiling using the supplied screws. Avoid using excessive force when fixing as this could deform the top guide track.
• Step 2 - Installing the bottom track
  Determine fixing positions. Locate the front edge of the floor track 30mm back from the front face of the plinth or end panel so the door will hang vertically. Screw the bottom track through prepared holes into the plinth using the supplied screws.
• Step 3 - Installing the doors
  Tilt the doors and insert the top guides into the rear channel. Insert the bottom rollers into the rear groove of the bottom track.Take care not to scratch the bottom track. Repeat with the second/next door using front channel and groove. For multi door systems alternate doors on tracks.
• Step 4 - Adjust Doors
  For vertical adjustment of each door use a posi-drive screwdriver on the bottom rollers (see photographs). Once happy with the final adjustments, lock in the anti jump device (Heritage only) into bottom track.